Parts for Aerial Lift - Aerial lifts are able to accommodate numerous odd jobs involving high and tricky reaching spaces. Sometimes used to complete regular maintenance in buildings with tall ceilings, trim tree branches, hoist heavy shelving units or mend phone cables. A ladder could also be utilized for many of the aforementioned projects, although aerial platform lifts offer more security and stability when properly used.
There are many models of aerial lift trucks existing on the market depending on what the task required involves. Painters often use scissor aerial hoists for example, which are categorized as mobile scaffolding, useful in painting trim and reaching the 2nd story and above on buildings. The scissor aerial hoists use criss-cross braces to stretch out and extend upwards. There is a platform attached to the top of the braces that rises simultaneously as the criss-cross braces raise.
Cherry pickers and bucket lift trucks are another type of the aerial hoist. Usually, they possess a bucket at the end of an elongated arm and as the arm unfolds, the attached bucket platform rises. Platform lifts utilize a pronged arm that rises upwards as the lever is moved. Boom lifts have a hydraulic arm that extends outward and elevates the platform. Every one of these aerial lifts require special training to operate.
Through the Occupational Safety & Health Association, also called OSHA, instruction courses are on hand to help make certain the workforce satisfy occupational standards for safety, system operation, inspection and maintenance and machine weight capacities. Employees receive certification upon completion of the lessons and only OSHA qualified personnel should operate aerial lift trucks. The Occupational Safety & Health Organization has developed guidelines to uphold safety and prevent injury when using aerial lifts. Common sense rules such as not utilizing this piece of equipment to give rides and ensuring all tires on aerial hoists are braced so as to hinder machine tipping are observed within the rules.
Unfortunately, statistics reveal that greater than 20 aerial lift operators die each year while operating and nearly ten percent of those are commercial painters. The majority of these mishaps were caused by inappropriate tie bracing, therefore several of these may well have been prevented. Operators should make certain that all wheels are locked and braces as a critical security precaution to stop the device from toppling over.
Marking the surrounding area with observable markers need to be utilized to safeguard would-be passers-by in order that they do not come near the lift. Also, markings must be set at about 10 feet of clearance between any utility cables and the aerial hoist. Lift operators must at all times be appropriately harnessed to the hoist while up in the air.
Click to Download the pdf